Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Frisco?
Garage door spring replacement in Frisco typically costs between $180 and $340, including parts and labor. This price covers the removal of the failed spring, installation of a properly rated replacement, and a full balance test of the door to ensure the new spring handles the weight correctly.
At Servo Garage Doors, we believe you should know the cost before a technician touches your door. Per Clause 1 of The Haven Standard, we provide a flat, written price and a clear scope of work before any labor begins. We don’t use “call for a quote” as a sales tactic; we provide the facts so you can make an informed decision.
Spring Replacement Cost Breakdown (2026)
The final cost depends on the specific hardware your door requires. Frisco homes often feature custom-built garage doors that use specific spring dimensions, which we measure on-site to ensure the door operates safely.
| Service Item | Estimated Price Range |
|---|---|
| Standard Torsion Spring Replacement (Single Spring) | $180 - $240 |
| Dual Torsion Spring Replacement (Both Springs) | $260 - $340 |
| Extension Spring Replacement (Per Set) | $190 - $280 |
| High-Cycle Spring Upgrade (Extended Life) | $220 - $340 |
These ranges account for the hardware grade and the specific torque requirements for your door size. Our technicians verify the spring wire diameter, coil length, and inside diameter before quoting. This documentation is part of our standard process, ensuring the replacement matches your door’s exact weight specifications.
What Affects Spring Replacement Pricing in Frisco
Several variables impact the cost of your spring repair. Understanding these factors helps you evaluate the quotes you receive from different providers in the North Texas area.
- Spring Type: Torsion springs, mounted above the door on a shaft, typically cost more than extension springs, which run along the horizontal tracks. Torsion systems are more common in modern Frisco developments like those near the Star District or Stonebriar.
- Door Weight and Size: A standard 8-foot-wide door requires different spring tension than a heavy 16-foot-wide carriage house door. We calculate the exact wire gauge needed to balance the door weight according to manufacturer specifications.
- Cycle Life Rating: We often install high-cycle springs. While these may have a slightly higher upfront cost than standard builder-grade springs, they are rated for 30,000 to 50,000 cycles, providing significantly longer utility for busy Frisco families.
- Hardware Condition: If the cables, rollers, or center bearing plates show signs of wear, we must address them to ensure the new springs function properly. We photograph these components to show you the wear before proposing any additional work.
- Emergency Response: While we offer 24/7 service, standard business hours allow for more efficient scheduling. We provide the same transparent, written pricing regardless of the time you call.
BeforeAfterThe Haven Standard: Our Guarantee of Transparency
Servo Garage Doors operates under The Haven Standard, which dictates how we handle every repair. We don’t believe in hidden fees or changing the price once work begins. When we arrive at your home, we perform a physical inspection of the failed component. Clause 4 of The Haven Standard requires our technicians to photograph the failed part-whether it’s a snapped coil or a fatigued metal fatigue point-and show it to you before discussing a replacement.
You receive a written price and a clear explanation of why the spring failed. We have replaced over 18,000 garage doors and spring systems since 2015, and every single job follows this documented process. We service all major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
How to Save on Spring Replacement
The best way to save on garage door maintenance is to prevent premature failure. While springs are wear-and-tear items that eventually need replacement, routine inspections can identify issues before they become an emergency. If you are unsure about the state of your door, we offer a free second opinion on any written estimate you have received from another company. You do not need a coupon or code; simply bring the paperwork, and we will review it against our own assessment.
If you suspect your spring has failed, avoid operating the door. Attempting to lift a door with a broken spring can burn out your opener motor or cause the cables to jump off the drums, leading to more costly repairs. Our team is available 24/7 to assist with Spring Replacement in Frisco. Call (940) 290-8313 for a free estimate.
Safety Warning: High-Tension Components
Garage door springs are under extreme tension. They are designed to counterbalance the weight of a door that can weigh several hundred pounds. Attempting to adjust, remove, or install these springs without the proper winding bars, safety glasses, and specialized training is dangerous and can result in severe injury or property damage. We strongly recommend leaving this work to a trained professional who uses the correct tools and follows established safety protocols.
FAQs - Spring Replacement Cost
How much does it cost to replace a single torsion spring in Frisco?
Replacing a single torsion spring typically costs between $180 and $240. We always measure the existing spring’s wire diameter and length to ensure the replacement matches your door’s balance requirements exactly.
Is it cheaper to repair or replace the springs?
Springs are not repairable once they break; they must be replaced. Because springs are sold as specific lengths and wire gauges, we replace the failed unit with a new spring that matches the exact torque specifications required for your door, ensuring it operates smoothly.
Can you come today to fix my garage door?
Yes, we offer 24/7 emergency garage door service in Frisco. When you call (940) 290-8313, you speak with a real person, not an automated system, and we dispatch a technician to address your repair needs promptly.
What does the “365-Day Done Right Promise” cover?
Our 365-Day Done Right Promise means that if a repair is not performed correctly, we return to make it right. We document every job with a photo record of the findings and the completed work, providing you with a clear paper trail of the service performed.
Do you charge for estimates?
We provide free estimates for all repairs. If you have an existing written estimate from another company, we are happy to provide a free second opinion. Call (940) 290-8313 to schedule a visit from our team.
Pricing reflects the Frisco market as of 2026. Servo Garage Doors Frisco offers free estimates - call (940) 290-8313.
Written by Marcus Deller, Owner at Servo Garage Doors, serving Frisco since 2015.
What Our Customers Say
"Opener had been stalling for months. The tech showed me the logic board reading, replaced the board instead of the whole unit, and it cost a third of the other quote I had."
- Robert K."The report they email afterwards has the cycle count on the springs and roughly when to expect the next one to go. Genuinely useful."
- Miguel S."Text came through with the technician name and photo twenty minutes before he arrived. Small thing, but I stopped worrying about who was at the door."
- Priscilla M.