Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Repair for Frisco Homeowners
A garage door that won’t open in Frisco is more than an inconvenience. It blocks your car, exposes your home, and interrupts your day. Servo Garage Doors Frisco has repaired garage doors across Frisco since 2015, with 18,000+ doors made right and a written price before any work starts, every time, no exceptions. We answer calls live, 24/7, including emergency garage door calls. If your door is stuck, noisy, or sagging, call (940) 290-8313 and you’ll speak to a real person, not a recording.
What Our Garage Door Repair Service Includes
Every garage door repair in Frisco starts with the same thing: a technician who shows up, diagnoses the failure, and photographs the failed component before quoting a replacement. That’s Clause 4 of The Haven Standard, and it’s been our rule since 2015. Here’s what we actually do when we repair a door.
Panel Replacement
A dented or cracked panel isn’t just cosmetic. It weakens the door’s structure, lets in weather, and can throw the door out of balance. We replace single panels or sections on most major brands, match the panel profile and color as closely as the manufacturer allows, and photograph the damaged panel before quoting a replacement. In Frisco, panel replacement typically runs $250-$500 depending on the panel size, material, and whether it’s insulated.
Spring Repair
Torsion springs do the heavy lifting; they counterbalance the door’s weight so the opener only has to guide it. When a spring breaks, you’ll hear it, usually a loud bang from the garage. This is the most common repair we do in Frisco, and it requires specific training and tools. Marcus Deller and our technicians measure the old spring’s wire diameter, inside diameter, and length before quoting a replacement, so you get the right spring, not a guess. Spring repair in Frisco typically runs $180-$340, and we carry springs for all eight major brands on the truck.
Cable Repair
Cables work with the springs to lift and lower the door. A frayed or snapped cable leaves the door lopsided or entirely stuck, and if one cable fails while the door is moving, the door can drop hard. We replace cables in pairs as a rule, because the surviving cable has the same wear as the failed one. Cable repair in Frisco runs $130-$250, and we photograph the old cables before and after so you see what was replaced.
Track Realignment
If your door shudders, binds, or makes grinding noises, the tracks may be out of alignment. Misaligned tracks wear out rollers, strain the opener, and can eventually throw the door off its track entirely. We check track spacing, plumb, and mounting hardware, then correct the alignment with shims and torque checks. Track realignment in Frisco runs $120-$240, and our photo record shows the before and after, including the adjustment measurements.
Roller Replacement
Rollers guide the door along the tracks, and they’re a wear item, especially the nylon rollers that most Frisco homes use. Worn rollers cause squeaking, rattling, and uneven travel. We replace rollers in sets, since a mixed set of worn and new rollers just moves the wear around. Roller replacement in Frisco runs $110-$220, and we’ll show you the worn rollers next to the new ones in the photo record.
Sensor Calibration
Safety sensors at the bottom of the door prevent it from closing on a person, pet, or object. When a sensor is misaligned, dirty, or failing, the door reverses for no obvious reason, or won’t close at all. We clean the lenses, check alignment with a laser level, verify the signal to the logic board, and replace the sensor if it’s actually failed. Sensor calibration is often included when we’re already on site for another repair, and as a standalone job it’s quoted the same way: flat price, written scope, before work begins.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Repair
We service every major garage door brand, and we stock OEM parts for the ones Frisco homeowners actually have. LiftMaster openers are the most common units we see in Frisco, particularly the belt-drive models in newer construction. We keep LiftMaster logic boards, safety sensors, and remotes on the truck, and we’ve replaced enough LiftMaster gear assemblies to know which symptoms point to the gear and which point to the board.
Chamberlain and Genie round out most of the remainder. Chamberlain and LiftMaster share a parent company, so many parts interchange, but Genie is a different animal, with different limits and different sensor behavior. Marcus and the team know the difference, because we’ve serviced hundreds of each. Clopay is the door brand we see most in Frisco, especially on homes built after 2015, and we can source Clopay panels to match existing doors. Whether you have one of those brands or a Wayne Dalton, Amarr, Craftsman, or Raynor, we can help, and we’ll show you the failed part before we quote the fix.
BeforeAfterSigns You Need Garage Door Repair Right Now
- The door is louder than it was last month. Grinding, squealing, or rattling usually means worn rollers, dry bearings, or a failing opener gear. Noise is the earliest warning, and it’s cheaper to fix before the part fails completely. If the sound changes pitch when the door is halfway up, the rollers are likely shot.
- The door reverses when closing, or refuses to close at all. Safety sensors are usually the culprit, but a reversing door can also point to a limit switch problem on the opener. If you’ve cleaned the sensor lenses and it still reverses, the sensor itself or the logic board may be failing. This is a common same-day repair in Frisco.
- The door sags on one side, or looks crooked in the opening. A sagging door means a spring is failing or a cable has stretched. If you can see daylight between the door and the weatherstripping on one side, the door is out of balance. That imbalance puts extra load on the opener and the remaining spring, and it will get worse.
- The opener runs, but the door doesn’t move. When the motor hums and the door stays put, the trolley carriage or the gear inside the opener has likely failed. This is a classic LiftMaster and Chamberlain issue, and it’s repairable in most cases without replacing the entire unit. Call us before you buy a new opener; the repair is often under $200.
- You found a gap between the door panels, or a panel is cracked or dented. A cracked panel lets in weather, pests, and heat, and in a Frisco summer, a poorly sealed door raises your cooling bill. Panel damage also weakens the door’s structure, which can lead to track and roller problems. Panel replacement is straightforward, but color matching matters, so bring us the make and model when you call.
Our Garage Door Repair Process - Step by Step
- 1
You call, a person answers. No phone tree, no callback window. We answer live, 24/7, and we ask specific questions: what the door is doing, what it sounds like, what brand it is. That helps us bring the right parts on the first trip.
- 2
We diagnose the failure on site. The technician inspects the springs, cables, rollers, tracks, sensors, and opener. If a spring is broken, we measure the wire diameter and coil count before quoting a replacement. If a cable is frayed, we photograph it while it’s still attached.
- 3
You get a flat, written price before any work starts. Clause 1 of The Haven Standard. The written scope lists the parts, labor, and total. No by-the-hour billing, no surprise line items, no “we found something else” mid-job. The price you see is the price you pay, agreed before we touch a wrench.
- 4
We do the repair with OEM or equivalent parts. We don’t use universal parts when the manufacturer’s part fits. For springs, we match the wire diameter and length to your door’s weight. For openers, we use the brand’s own parts whenever possible. Every repair is torqued to spec and tested through at least three full open-and-close cycles.
- 5
You receive a documented photo record before we leave. Photos of the failed component, the new component installed, and the door in operation. That record is yours, not ours. It documents what we found, what we did, and what it looked like when we finished. The 365-Day Done Right Promise covers the work: if it’s not right, we make it right.
How Much Does Garage Door Repair Cost in Frisco?
Garage door repair in Frisco typically runs $150-$600, depending on what failed. Here’s the breakdown by job type:
- Spring repair: $180-$340
- Cable repair: $130-$250
- Opener repair: $120-$320
- Opener installation: $250-$550
- Panel replacement: $250-$500
- Track realignment: $120-$240
- Roller replacement: $110-$220
- New door installation: $700-$2,200
What moves the price within those ranges is the part itself, not the labor rate. A single torsion spring on a 7-foot door is cheaper than a pair on a 16-foot door. A Chamberlain logic board is a different price than a Genie sensor. The condition of the door matters too: a door that’s been out of balance for months may have damaged rollers and cables as well as the spring that started it.
We quote a flat price, in writing, before any work starts. Free estimates mean we come out, diagnose the problem, and hand you a written price and scope. No obligation, no pressure, and the photo record is included on every visit, whether you hire us or not. If you have a written estimate from another company, bring it. We’ll give you a Free Second Opinion on it, no coupon required.
Garage Door Repair Near Frisco - Our Service Area
Servo Garage Doors Frisco serves Frisco and the surrounding communities, including Prosper, The Colony, Little Elm, Plano, Allen, McKinney, Celina, and Far North Dallas. Our technicians live and work in this area, so response times are measured in minutes, not days. We also provide Garage Door Repair in Prosper and Garage Door Repair in The Colony, with the same written-price-first system and photo record on every job. If you’re in Frisco or a neighboring city, you’re in our service area, and we’ll get to you quickly.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Repair in Frisco
Garage door repair covers the diagnosis and replacement of worn or failed parts on an existing garage door system. That includes springs, cables, rollers, tracks, panels, sensors, and opener components. At Servo Garage Doors Frisco, every repair is quoted as a flat, written price before work starts, and every job ends with a photo record of what was found and what was done.
Most repairs in Frisco are completed in under two hours on site. Spring replacement, roller replacement, cable replacement, and sensor calibration are typically 60-90 minutes. Panel replacement and track realignment can run longer, depending on the door size and the extent of the adjustment. We dispatch same-day in most cases, and we’ll give you a time window when you call.
Garage door repair in Frisco runs $150-$600 for most jobs. Spring repair is $180-$340, cable repair is $130-$250, roller replacement is $110-$220, and panel replacement is $250-$500. The exact price depends on the part and your door’s size, and you’ll have a written quote before any work starts. Call (940) 290-8313 for an exact quote; estimates are free.
Yes. LiftMaster and Chamberlain are the two most common opener brands we repair in Frisco, and we stock their OEM parts on the truck. We’ve replaced hundreds of LiftMaster gear assemblies and Chamberlain logic boards, so we know the failure patterns for each. We service Genie, Craftsman, and Raynor units as well.
Yes. We answer calls live, 24 hours a day, 7 days a week, including holidays. If your door is stuck open, a spring has snapped, or the door won’t close and your car is trapped inside, call (940) 290-8313. A real person will answer, take your address, and dispatch a named technician with an on-the-way text.
Every repair is covered by the 365-Day Done Right Promise. If the repair isn’t right, we make it right. That’s in writing, not a handshake. Parts carry their manufacturer’s warranty as well, and the documented photo record gives you evidence of exactly what was installed and when.
Clear the area around the garage door, inside and out. Move vehicles out of the garage if possible, and clear anything stored near the tracks and opener. If you have a second estimate from another company, have it ready; we’ll give you a Free Second Opinion. You don’t need to move anything else, and you don’t need to be an expert. That’s our job.
Schedule Your Garage Door Repair Service in Frisco Today
Call (940) 290-8313 for a free estimate on garage door repair in Frisco. A real person answers, 24/7. We’ll ask what the door is doing, dispatch a technician with the right parts, and hand you a written price before any work begins. No pressure, no surprises, no invoice bigger than the quote. If you’d like to learn more about us first, visit our home page or read the details on Garage Door Repair in Frisco.
Written by Marcus Deller, Owner at Servo Garage Doors Frisco, serving Frisco since 2015.