Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Fast, Reliable Garage Door Installation Across Far North Dallas
A new garage door installation in Far North Dallas runs $700-$2,200 for most single and double doors, with custom wood and carriage-house styles landing at the higher end. We spend a lot of time in the Prestonwood and Bent Tree corridors, and we know what these 1980s-era garages throw at you: racked frames from clay soil, HOA style restrictions, and doors that weigh more than standard tract builds. If you’re planning a replacement or building new, call Marcus Deller’s team at (940) 290-8313 and we’ll bring a written price and a straight answer, not a sales script.
Every quote is flat, written, and scoped before we touch anything. That’s Clause 1 of The Haven Standard, the documentation system Servo Garage Doors has operated under since 2015. No hourly open-ended billing. No “we’ll see once we get in there.” You know the number before we unload a panel.
Why Servo Garage Doors Frisco Is Far North Dallas’s Preferred Garage Door Installation Company
People in Far North Dallas don’t call the first company that pops up. They read the three-star reviews, they ask about the parts, and they want the price on the page before they dial. That’s exactly how we’re built. Servo has made more than 18,000 garage doors right since 2015, and every single one closed with a written price agreed before work started and a documented photo record when the technician left. Not a handshake. Paper.
Our reputation across Far North Dallas comes from the plumb check, not the pitch. Before we quote a spring or install a panel on any oversized 1980s garage in Prestonwood or Bent Tree, we check whether the opening itself is square. Blackland Prairie clay doesn’t care about your foundation’s original engineering. It swells and shrinks, and over 40 years it racks a four-car opening enough that a new door will bind within months if you skip that step. That’s why our local customers see us as the company that diagnosed the actual problem, not the one that sold them a part.
Technicians carry the parts Far North Dallas homes actually need: high-cycle torsion springs rated for 25,000 cycles, belt-drive openers with rolling-code remotes, and weather seals cut for the wide temperature swings between Dallas freezes and 100°F summers. We answer calls live 24/7, including holidays. When you call, you get a named technician and an on-the-way text, not a callback window.
Our Garage Door Installation Services in Far North Dallas

New Door Installation
A full new door installation in Far North Dallas means more than lifting the old panel off the track and bolting on a new one. We measure the opening for square first, because a racked frame from clay-driven foundation movement changes every downstream decision: track placement, spring rating, hinge spacing. You get a flat written price covering the door, the hardware, the labor, and the haul-away, before anything starts. Then we install, photograph the finished work, and hand you the record.
Single Car Door
Single-car garages in Far North Dallas show up most often in townhome clusters and alley-load developments, where ceiling clearance is tighter than a typical two-car front entry. That changes opener rail positioning and top-panel travel. We spec the door and hardware to the actual headroom in your garage, install with standard or low-clearance track as the space demands, and leave you with a door that seals and cycles cleanly.
Double Car Door
Double doors are the workhorse of the 1975-1995 Far North Dallas build boom, and many of the originals are steel raised-panel or wood carriage-house doors now 30 to 45 years old. If your springs are original, they’re at end-of-life, and the opening has likely shifted enough to need plumb correction before the new door goes in. We install double doors rated for the actual cycle count your household runs, not a builder-grade spring that dies in five years.
Custom Garage Door
HOA rules in communities like Bent Tree frequently restrict door styles, finishes, and even glass ratios. Custom garage door installation in Far North Dallas means matching a 1988 carriage-house aesthetic without violating the design review. We work with wood, steel, and composite builds in finishes that clear the HOA, and we document the installed product with photos so you can show the board exactly what’s on the house.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Far North Dallas
We install and service LiftMaster, Chamberlain, Genie, and Clopay products across Far North Dallas, along with Amarr, Wayne Dalton, Craftsman, and Raynor where the job calls for them. We’re not locked into one manufacturer’s catalog, which matters when an HOA requires a specific wood grain or a townhome needs a low-profile opener rail that only certain Chamberlain or LiftMaster models can accommodate. Our trucks carry high-failure parts for these brands, so a spring replacement or opener swap doesn’t stall waiting on a distributor.
Common Garage Door Installation Problems We See in Far North Dallas Homes

- Clay-racked openings that bind new doors. Foundation movement from Blackland Prairie clay shifts oversized garage frames out of square over decades. We verify plumb before install, and we shim the track so the new door doesn’t fight the geometry from day one.
- HOA style rejections on full replacements. Bent Tree and similar communities restrict door styles and finishes. If the board hasn’t approved your planned door, the install can get pulled mid-job. We match materials and finish to what clears the association before you order.
- Builder-grade springs on high-cycle doors. A four-car garage that cycles six or more times daily eats a 10,000-cycle spring in under five years. On 1980s-era homes where the originals are already spent, we install high-cycle springs rated for 25,000 cycles and show you the rating on the written scope.
- Low-clearance townhome opener rails. Alley-load garages and townhome builds often have less headroom than standard specs assume. A rail installed at normal clearance hits the ceiling or the top panel binds. We measure clearance and install the correct rail configuration.
Pricing for Garage Door Installation in Far North Dallas, TX
| Service | Price Range |
|---|---|
| New Door Installation | $700-$2200 |
| Spring Repair | $180-$340 |
| Track Realignment | $120-$240 |
Custom wood and carriage-house doors land at the top of the new door range because the materials cost more and the HOA compliance work adds time. A standard steel double door often sits in the $900-$1,400 band. We print the full scope and dollar figure on the quote before the work begins. You approve it, we do the job, and the price doesn’t move unless the scope changes and you approve that change in writing first. Free estimates, no coupon required. Call (940) 290-8313.
We Also Serve Cities Near Far North Dallas

Our crews cover Far North Dallas and the surrounding northern suburbs, including Frisco, Prosper, The Colony, and Little Elm. If you’re outside the immediate Far North Dallas corridor, we’ll route a local technician from our Dallas-Fort Worth dispatch. And if you’re comparing installation firms, bring us a written estimate from any other company and we’ll give it a free second opinion, no strings. Learn more about our Garage Door Installation service or see how we serve Far North Dallas specifically.
Serving Far North Dallas, TX - Our Local Coverage Area
We’re based in the Far North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Far North Dallas

Do I need HOA approval before installing a new garage door in Bent Tree?
Yes. Bent Tree’s design rules restrict door styles, finishes, and sometimes window and hardware treatments. Before you order any door, check your association’s architectural review requirements, and get the style approved in writing. We’ll spec materials and a finish that match what the board has already cleared for similar homes, so the install doesn’t stall mid-job.
Why does my new garage door keep binding on one side in Prestonwood?
The most common cause is a racked opening from clay-driven foundation movement, not a bad install or a defective panel. Prestonwood homes built on the Blackland Prairie clay shift over decades, and a door installed square will bind as the frame moves. We check the opening for plumb first and shim the track to correct the geometry before hanging the door. Call (940) 290-8313 and we’ll diagnose it properly.
What type of torsion spring should go on my 1990s three-car garage in Far North Dallas?
A high-cycle spring rated for 25,000 cycles or better. The original builder-grade springs on a 1990s three-car door were likely rated for 10,000 cycles, and if that door cycles five or six times daily, they’re already near the end. A 25,000-cycle spring costs more upfront but lasts far longer on a high-use family garage. We’ll show you the cycle rating on the written quote.
Can you install a garage door opener that fits my townhome’s low ceiling and tight clearance?
Yes. Low-clearance townhome garages in Far North Dallas need opener rails and top-panel travel set to the actual measured headroom, not the default spec. We measure before we mount, and we use belt-drive Chamberlain or LiftMaster models with rolling-code remotes where the rail profile allows proper clearance. The price is set on the written scope before work begins.
How much does a full custom wood garage door replacement cost in Far North Dallas?
A custom wood door in Far North Dallas typically runs $1,500-$2,200 installed, depending on size, wood species, finish, and HOA-required hardware. That’s the high end of the $700-$2,200 new door range because custom wood materials cost more and the compliance review adds time. We’ll quote it flat, in writing, before anything is ordered. Call (940) 290-8313 for an exact number on your opening.
Ready to replace that racked, worn-out door? Call Marcus Deller and the Servo team at (940) 290-8313. We’ll measure, check the plumb, and hand you a written price before any work starts. Free estimates, no pressure, and you keep the paper trail.
Written by Marcus Deller, Owner at Servo Garage Doors Frisco, serving Far North Dallas with documented, written-price garage door installation since 2015.






Before
After
Before
After